11.7. Slope QoS Policy Command Reference

11.7.1. Command Hierarchies

  1. Configuration Commands for 7210 SAS-D
  2. Configuration Commands for 7210 SAS-Dxp
  3. WRED Commands (Supported Only on 7210 SAS-D)
  4. Operational Commands
  5. Show Commands

11.7.1.1. Configuration Commands for 7210 SAS-D

— config
— qos
— slope-policy name [create]
— no slope-policy name
— description description-string
— no description
— queue queue-id
— [no] high-slope
— max-avg percent
— no max-avg
— max-prob percent
— no max-prob
— [no] shutdown
— start-avg percent
— no start-avg
— [no] low-slope
— max-avg percent
— no max-avg
— max-prob percent
— no max-prob
— [no] shutdown
— start-avg percent
— no start-avg
— [no] shutdown
— [no] non-tcp-slope
— max-avg percent
— no max-avg
— max-prob percent
— no max-prob
— [no] shutdown
— start-avg percent
— no start-avg
— time-average-factor value
— no time-average-factor

11.7.1.2. Configuration Commands for 7210 SAS-Dxp

— config
— qos
— slope-policy name [create]
— no slope-policy name
— description description-string
— no description
— queue queue-id
— [no] high-slope
— max-avg percent
— no max-avg
— max-prob percent
— no max-prob
— [no] shutdown
— start-avg percent
— no start-avg
— [no] low-slope
— max-avg percent
— no max-avg
— max-prob percent
— no max-prob
— [no] shutdown
— start-avg percent
— no start-avg
— [no] shutdown
— time-average-factor value
— no time-average-factor

11.7.1.3. WRED Commands (Supported Only on 7210 SAS-D)

— config
— system
— qos
— no use-wred-slopes
— use-wred-slopes slope-type

11.7.1.4. Operational Commands

— config
— qos
— copy slope-policy src-name dst-name [overwrite]

11.7.1.5. Show Commands

— show
— qos
— slope-policy [slope-policy-name] [detail]