This chapter provides information to configure the DSCP classification policy, dot1p classification policy, and MPLS EXP classification policy using the CLI.
These policies allow the user to define a policy or template that maps the packet priority bits, like dot1p, IP DSCP, and MPLS EXP bits to FC and profile. The template can then be used in a SAP ingress policy to define the ingress classification of flows to FC.
Table 28 describes the support available on different 7210 SAS platforms.
Policy Name | Support Available |
dot1p-classification | All platforms with sap-ingress policy and network-qos policy. |
DSCP classification | All platforms with sap-ingress policy and network-qos policy. |
MPLS-EXP classification | Only 7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C with network-qos policies |
This policy is used to define the map of IP DSCP values in the IP header of the packet to FC and profile (ingress profile).
This policy is used define the map of dot1p values in the Ethernet frame to FC and profile (ingress profile).
This policy is used define the map of MPLS EXP values in the MPLS header of the packet to FC and profile (ingress profile).
The following is a sample configuration output that shows the enabling of the DSCP classification policy, dot1p classification policy, and MPLS EXP classification policy.