Supported on all 7210 SAS platforms as described in this document
This command enables the context to configure per port frame-based accounting. It can be enabled or disabled on each port.
When enabled, all SAP ingress FC meter rates, SAP ingress aggregate meter rates, shaper rates, meter statistics, and queue statistics on that port also account for the Ethernet Layer 1 overhead (of 20 bytes) in both ingress and egress directions. For example, all SAP ingress FC meter rates, SAP ingress aggregate meter rates, ingress queue shaper rates, egress queue shaper rates, and aggregate SAP shaper rates account for the Ethernet overhead.
The no form of this command disables frame-based-accounting.
no frame-based-accounting
Supported on all 7210 SAS platforms as described in this document
This command displays the accounting status of a network qos policy along with other details of the policy. When frame-based-accounting is enabled accounting is shown as frame-based otherwise packet-based.
The following output is an example of QoS network policy information, and Table 25 describes the output fields.
Label | Description |
Policy-ID | Displays the policy identifier |
Profile | Out — Specifies the dot1p marking for the packets which are out-of-profile, egressing on this queue In — Specifies the dot1p markings for in-profile packets egressing this queue |
Scope | Exclusive — Implies that this policy can only be applied to a single SAP Template — Implies that this policy can be applied to multiple SAPs on the router |
Description | A text description of the port |
Supported on all 7210 SAS platforms as described in this document
This command displays accounting status of a network-queue policy along with other details of the policy. When frame-based-accounting is enabled, accounting is shown as frame-based; otherwise it is shown as packet-based.
The following output is an example of QoS network-queue policy information, and Table 26 describes the output fields.
Label | Description |
Policy | Displays the policy |
Accounting | Packet-based — Specifies that the meters associated with this policy do not account for packet framing overheads (such as the Inter Frame Gap (IFG) and the preamble for Ethernet), while accounting for the bandwidth to be used by this flow Frame-based — Specifies that the meters associated with this policy account for the packet framing overheads (such as, for Ethernet, the IFG and preamble), while accounting the bandwidth to be used by the flow |
Description | A text description of the port |
Port-Id | Displays the specified port ID |
Supported on all 7210 SAS platforms as described in this document
This command displays accounting status of a sap-ingress policy along with other details of the policy. When frame-based-accounting is enabled accounting is shown as frame-based otherwise packet-based.
The following output is an example of QoS SAP ingress policy information, and Table 27 describes the output fields.
Label | Description |
Policy-Id | The ID that uniquely identifies the policy |
Scope | Exclusive — Implies that this policy can only be applied to a single SAP Template — Implies that this policy can be applied to multiple SAPs on the router |
Default FC | Specifies the default forwarding class for the policy |
Criteria-type | IP — Specifies that an IP criteria-based SAP ingress policy is used to select the appropriate ingress meter and corresponding forwarding class for matched traffic MAC — Specifies that a MAC criteria-based SAP is used to select the appropriate ingress meters and corresponding forwarding class for matched traffic |
MAC Sub-Criteria | Displays the configured MAC sub-criteria |
IP Sub-Criteria | Displays the configured IP sub-criteria |
Description | A text string that helps identify the policy’s context in the configuration file |