egress-rate <sub-rate> [max-burst <size-in-kbits>]
no egress-rate
config>port>ethernet
Supported on all 7210 SAS platforms as described in this document
This command configures maximum egress rate and corresponding burst value for a port. The egress rate is configured as kb/s while max-burst is configured as kilobits while max-burst should be between 64 and 16384 or default.
10G ports are not supported on the 7210 SAS-D.
The no form of the command removes the egress rate from the port.
No egress-rate and max-burst is configured for the port.
Specifies an integer value between 1 and 1000000 kb/s and between 1 and 10000000 kb/s for 10G port. 7210 SAS-D devices do not support 10G port.
Specifies an integer value, in kilo-bits, between 32 Kbits and 16384 Kbits the default value is 64 Kbits.