Default access egress QoS policy values

Example

The following are sample access egress default policy parameters.

*A:card-1>config>qos>access-egress# info detail
----------------------------------------------
            description "Default Access egress QoS policy."
            no remarking
            scope template
            queue 1
                adaptation-rule cir closest pir closest
                rate cir 0 pir max
            exit
            queue 2
                adaptation-rule cir closest pir closest
                rate cir 0 pir max
            exit
            queue 3
                adaptation-rule cir closest pir closest
                rate 0 pir max
            exit
            queue 4
                adaptation-rule cir closest pir closest
                rate cir 0 pir max
            exit
            queue 5
                adaptation-rule cir closest pir closest
                rate cir 0 pir max
            exit
            queue 6
                adaptation-rule cir closest pir closest
                rate cir 0 pir max
            exit
            queue 7
                adaptation-rule cir closest pir closest
                rate cir 0 pir max
            exit
            queue 8
                adaptation-rule cir closest pir closest
                rate cir 0 pir max
            exit
----------------------------------------------
*A:card-1>config>qos>access-egress#

The following table lists the default FC marking values when remarking is enabled on the access egress policy.

Table: Default FC marking values for 7210 SAS-D and 7210 SAS-Dxp
Default FC value	dot1p marking values
af:	dot1p-in-profile 2 dot1p-out-profile 2
be:	dot1p-in-profile 0 dot1p-out-profile 0
ef:	dot1p-in-profile 5 dot1p-out-profile 5
h1:	dot1p-in-profile 6 dot1p-out-profile 6
h2:	dot1p-in-profile 4 dot1p-out-profile 4
l1:	dot1p-in-profile 3 dot1p-out-profile 3
l2:	dot1p-in-profile 1 dot1p-out-profile 1
nc:	dot1p-in-profile 7 dot1p-out-profile 7