Every access Ethernet port is associated, by default, with the default access-egress policy (policy-id 1). You can replace the default policy with a customer-configured policy, but you cannot entirely remove the policy from the port configuration. When you remove a non-default access-egress policy, the association reverts to the default policy-id 1.
A QoS policy cannot be deleted until it is removed from all access ports where it is applied.
When a QoS policy is still in use, the following error occurs.
*A:card-1>config>qos# no access-egress 30
MINOR: CLI Could not remove Access egress policy "30" because it is in use.