A slope policy is associated by default with access and access uplink egress pools. A default policy may be replaced with a non-default policy, but a policy cannot be entirely removed from the configuration. When a non-default policy is removed, the policy association reverts to the default slope policy policy-id default. A QoS policy cannot be deleted until it is removed from all ports where it is applied or if the policies are using the slope-policy.
ALA-7>config>qos# no slope-policy slopePolicy1
MINOR: QOS #1902 Slope policy has references
ALA-7>config>qos#
The following CLI syntax examples can be used to remove slope policies from ports.
config>port>access>egress>pool# no slope-policy name
config>port>accesss>uplink>egress>pool# no slope-policy name