[no] network-queue policy-name [create]
config>qos
Supported on all 7210 SAS platforms as described in this document
This command creates a context to configure a network queue policy. Network queue policies on the Ethernet port define network egress queuing.
Network queue policies define the egress queuing for access-uplink ports.
The no form of this command removes the network-queue policy from use. However, the network queue with policy-name default cannot be modified or deleted.
default
Specifies the name of the network queue policy. Allowed values are any string up to 32 characters composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes.
Specifies that a network queue policy is created.