broadcast-meter meter-id
no broadcast-meter
config>qos>sap-ingress>fc
Supported on all 7210 SAS platforms as described in this document
This command overrides the default broadcast forwarding type meter mapping for fc fc-name. The specified meter-id must exist within the policy as a multipoint meter before the mapping can be made. After the FC mapping is executed, all broadcast traffic on a SAP using this policy is forwarded using the meter-id.
The broadcast forwarding type usually tracks the multicast forwarding type definition. This command overrides that default behavior.
The no form of this command reverts the broadcast forwarding type meter-id to the default of tracking the multicast forwarding type meter mapping.
Specifies an existing multipoint queue defined in the config>qos>sap-ingress context.
meter meter-id
no meter
config>qos>sap-ingress>fc
Supported on all 7210 SAS platforms as described in this document
This command overrides the default unicast forwarding type meter mapping for fc fc-name. The specified meter-id must exist within the policy as a non-multipoint meter before the mapping can be made. After the FC mapping is executed, all unicast traffic (this includes all traffic, even broadcast and multicast for services) on a SAP using this policy is forwarded using the meter-id.
The no form of this command reverts the unicast (point-to-point) meter-id to the default meter for the FC.
Specifies an existing non-multipoint meter defined in the config>qos>sap-ingress context.
multicast-meter meter-id
no multicast-meter
config>qos>sap-ingress>fc
Supported on all 7210 SAS platforms as described in this document
This command overrides the default multicast forwarding type meter mapping for fc fc-name. The specified meter-id must exist within the policy as a multipoint meter before the mapping can be made. After the FC mapping is executed, all multicast traffic on a SAP using this policy is forwarded using the meter-id.
The multicast forwarding type includes the unknown unicast forwarding type and the broadcast forwarding type, unless each is explicitly defined to a different multipoint meter. When the unknown and broadcast forwarding types are left as default, they will track the defined meter for the multicast forwarding type.
The no form of this command reverts the multicast forwarding type meter-id to the default meter for the FC. If the broadcast and unknown forwarding types were not explicitly defined to a multipoint meter, they are also reverted to the default multipoint meter.
Specifies an existing multipoint meter defined in the config>qos>sap-ingress context.
unknown-meter meter-id
no unknown-meter
config>qos>sap-ingress>fc
Supported on all 7210 SAS platforms as described in this document
This command overrides the default unknown unicast forwarding type meter mapping for fc fc-name. The specified meter-id must exist within the policy as a multipoint meter before the mapping can be made. After the FC mapping is executed, all unknown traffic on a SAP using this policy is forwarded using the meter-id.
The unknown forwarding type usually tracks the multicast forwarding type definition. This command overrides that default behavior.
The no form of this command reverts the unknown forwarding type meter-id to the default of tracking the multicast forwarding type meter mapping.
Specifies an existing multipoint meter defined in the config>qos>sap-ingress context.