Absolute

The absolute command configures a start and end time that does not repeat.

Use the following syntax to configure a time range that does not repeat.

config>system>cron>time-range$
        absoluteabsolute-time end absolute-time

Example: Command usage to configure a non-repetitive time range

config>system>cron>time-range$ absolute start 2006/05/05,11:00 end 
    2006/05/06,11:01
    config>system>cron>time-range$

Example

The following is a sample configuration output of an absolute time range beginning on May 5, 2006 at 11:00 and ending May 6, 2006 at 11:01.

A:sim1>config>system>cron>time-range# show cron time-range detail
===============================================================================
Cron time-range details
===============================================================================
Name        : test1
Triggers    : 0
Status      : Inactive
Absolute    : start 2006/05/05,11:00 end 2006/05/06,11:01
===============================================================================
A:sim1>config>system>cron>time-range#