Broadcast-client

The broadcast-client command enables listening at the global device level to SNTP broadcast messages on interfaces with broadcast client enabled.

Use the following CLI syntax to enable listening to SNTP broadcast messages.

config>system>time>sntp
        broadcast-client

Example: Command usage to enable listening to SNTP broadcast messages

config>system>time>sntp# 
    config>system>time>sntp# broadcast-client 
    config>system>time>sntp# no shutdown
Example

The following is a sample configuration output of SNTP enabled with the broadcast-client command enabled.

A:ALA-12>config>system>time# info
----------------------------------------------
            sntp
                broadcast-client
                no shutdown
            exit
            dst-zone PT
                start second sunday april 02:00
                end first sunday october 02:00
                offset 0
            exit
            zone GMT
----------------------------------------------
A:ALA-12>config>system>time#