The broadcastclient command enables listening to NTP broadcast messages on the specified interface.
Use the following CLI syntax to enable listening to NTP broadcast messages.
config>system>time>ntp
broadcastclient [router router-name] {interface ip-int-name} [authenticate]
config>system>time>ntp#
config>system>time>ntp# broadcastclient interface int11
config>system>time>ntp# no shutdown
The following is a sample configuration of NTP enabled with the broadcastclient parameter enabled.
A:ALA-12>config>system>time# info
----------------------------------------------
ntp
broadcastclient interface int11
no shutdown
exit
dst-zone PT
start second sunday april 02:00
end first sunday october 02:00
offset 0
exit
zone UTC
----------------------------------------------
A:ALA-12>config>system>time#