screen
clear
Supported on all 7210 SAS platforms as described in this document
This command clears the Telnet or console screen.
ptp inactive-peers
ptp statistics
ptp peer ip-address statistics
clear>system
7210 SAS-D ETR, 7210 SAS-Dxp 12p ETR, 7210 SAS-K 2F1C2T, 7210 SAS-K 2F6C4T, and 7210 SAS-K 3SFP+ 8C
This command clears PTP statistics.
Keyword to remove PTP peers which are not currently exchanging PTP packets with the router.
Clears statistics for the specified peer.
Clears all PTP statistics.
script-control
clear>system
7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F1C2T, 7210 SAS-K 2F6C4T, and 7210 SAS-K 3SFP+ 8C
This command clears script information.
script-policy
clear>system>script-control
7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F1C2T, 7210 SAS-K 2F6C4T, and 7210 SAS-K 3SFP+ 8C
Commands in this context clear script policy information.
completed [script-policy-name] [owner owner-name]
clear>system>script-control>script-policy
7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F1C2T, 7210 SAS-K 2F6C4T, and 7210 SAS-K 3SFP+ 8C
This command clears completed script run history entries.
Specifies to only clear history entries for the specified script-policy, up to 32 characters.
Specifies to only clear history entries for script-policies with the specified owner, up to 32 characters.
sync-if-timing {ref1 | ref2}
clear>system
7210 SAS-D ETR, 7210 SAS-K 2F1C2T, 7210 SAS-K 2F6C4T, and 7210 SAS-K 3SFP+ 8C
This command individually clears (re-enable) a previously failed reference. As long as the reference is one of the valid options, this command is always executed. An inherent behavior enables the revertive mode which causes a re-evaluation of all available references.
Clears the first timing reference.
Clears the second timing reference.