Coordinates

Use the optional coordinates command to specify the GPS location of the device. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes.

Use the following CLI syntax to configure the location.

config>system
        coordinates coordinates

Example: Command usage to configure the location

config>system# coordinates "N 45 58 23, W 34 56 12"

Example: Configuration output of the general system commands

sysName@domain>config>system# info
#------------------------------------------
echo "System Configuration "
#------------------------------------------
name "ALA-12"
        contact "Fred Information Technology"
        location "Bldg.1-floor 2-Room 201"
        clli-code "abcdefg1234"
        coordinates "N 45 58 23, W 34 56 12"

. . .
        exit
----------------------------------------------
A:ALA-12>config>system#