This command is an enhancement for specific ingress policies including filter lists and QoS policies. Use this command to create time range based associations of previously created filter lists and QoS policies. Multiple policies may be included and each must be assigned a different priority; in case time ranges overlap, the priority is used to determine the prevailing policy. Only a single reference to a policy may be included without a time range. To configure a daily time range across midnight, use a combination of two entries. An entry that starts at hour zero takes over from an entry that ends at hour 24.
Use the following syntax to configure time range based associations.
config>system>cron
tod-suite tod-suite-name create
ingress
filter ip ip-filter-id [time-range time-range-name]
[priority priority]
filter ipv6 ipv6-filter-id [time-range time-range-name]
filter mac mac-filter-id [time-range time-range-name] [priority priority]
qos policy-id [time-range time-range-name] [priority priority]
config>system>cron>tod-suite$ ingress filter ip 100
config>system>cron>tod-suite$
sim1>config>filter# ip-filter 100 create
A:sim1>config>filter>ip-filter$ entry 10 create
A:sim1>config>filter>ip-filter>entry$
...
A:sim1>config>system>cron>tod-suite# ingress filter ip 100
A:sim1>config>system>cron>tod-suite# info detail
----------------------------------------------
no description
ingress
filter ip 100
exit
----------------------------------------------
A:sim1>config>system>cron>tod-suite#
config>system>cron>tod-suite$ ingress qos 101
config>system>cron>tod-suite$
The following is a sample configuration output of an association with a SAP ingress QoS policy.
A:sim1>config>qos# sap-egress 101 create
...
A:sim1>config>system>cron>tod-suite# ingress qos 101
A:sim1>config>system>cron>tod-suite# info detail
----------------------------------------------
no description
ingress
qos 101
exit
----------------------------------------------
A:sim1>config>system>cron>tod-suite#