filter
monitor
Supported on all 7210 SAS platforms as described in this document
Commands in this context configure criteria to monitor IP and MAC filter statistics.
ip ip-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
monitor>filter
monitor>management-access-filter
Supported on all 7210 SAS platforms as described in this document
This command enables IP filter monitoring. The statistical information for the specified IP filter entry is displayed at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified IP filter. The subsequent statistical information listed for each interval is displayed as a delta to the previous screen output.
When the rate keyword is specified, the rate per second for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands, but only statistical information is displayed. Monitor commands display the selected statistics according to the configured number of times at the interval specified.
Displays detailed information for the specified filter ID and its filter entries.
Displays information about the specified filter entry ID for the specified filter ID only.
Specifies the interval for each display in seconds.
Specifies how many times the command is repeated.
Keyword to display raw statistics, without processing. No calculations are performed on the delta or rate statistics.
The rate per second for each statistic is displayed instead of the delta.
The following output is an example of filter IP statistics.
Sample outputA:ALA-1>monitor# filter ip 10 entry 1 interval 3 repeat 3 absolute
===============================================================================
Monitor statistics for IP filter 10 entry 1
===============================================================================
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
-------------------------------------------------------------------------------
At time t = 6 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
-------------------------------------------------------------------------------
At time t = 9 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
===============================================================================
A:ALA-1>monitor#
A:ALA-1>monitor# filter ip 10 entry 1 interval 3 repeat 3 rate
===========================================================================
Monitor statistics for IP filter 10 entry 1
===========================================================================
At time t = 0 sec (Base Statistics)
---------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
---------------------------------------------------------------------------
At time t = 3 sec (Mode: Rate)
---------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
---------------------------------------------------------------------------
At time t = 6 sec (Mode: Rate)
---------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
---------------------------------------------------------------------------
At time t = 9 sec (Mode: Rate)
---------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
===========================================================================
A:ALA-1>monitor#
ipv6 ipv6-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
monitor>filter
monitor>management-access-filter
Supported on all 7210 SAS platforms as described in this document
This command enables IPv6 filter monitoring. The statistical information for the specified IPv6 filter entry is displayed at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified IPv6 filter. The subsequent statistical information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the rate per second for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor commands display the selected statistics according to the configured number of times at the interval specified.
Displays detailed information for the specified IPv6 filter ID and its filter entries.
Displays information about the specified IPv6 filter entry ID for the specified filter ID only.
Specifies the interval for each display in seconds.
Specifies how many times the command is repeated.
Keyword to display raw statistics, without processing. No calculations are performed on the delta or rate statistics.
Keyword to display the rate per second for each statistic instead of the delta.
*A:7210SAS>monitor>filter# ipv6 10 entry 10 interval 3 repeat 3 absolute
===============================================================================
Monitor statistics for IPv6 filter 10 entry 10
===============================================================================
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Ing. Matches : 0 pkts
Egr. Matches : 0 pkts
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Ing. Matches : 0 pkts
Egr. Matches : 0 pkts
-------------------------------------------------------------------------------
At time t = 6 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Ing. Matches : 0 pkts
Egr. Matches : 0 pkts
-------------------------------------------------------------------------------
At time t = 9 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Ing. Matches : 0 pkts
Egr. Matches : 0 pkts
===============================================================================
*A:7210SAS>monitor>filter#
mac mac-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
monitor>filter
Supported on all 7210 SAS platforms as described in this document
This command enables MAC filter monitoring. The statistical information for the specified MAC filter entry is displayed at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified MAC filter. The subsequent statistical information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the rate per second for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor commands display the selected statistics according to the configured number of times at the interval specified.
Specifies the MAC filter policy ID.
Displays information on the specified filter entry ID for the specified filter ID only.
Specifies the interval for each display in seconds.
Specifies how many times the command is repeated.
Keyword to display the raw statistics, without processing. No calculations are performed on the delta or rate statistics.
Keyword to display the rate per second for each statistic instead of the delta.
The following output is an example of MAC filter statistics.
Sample outputA:ALA-1>monitor>filter# mac 50 entry 10 interval 3 repeat 3 absolute
===============================================================================
Monitor statistics for Mac filter 50 entry 10
===============================================================================
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
------------------------------------------------------------------------------
At time t = 3 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
-------------------------------------------------------------------------------
At time t = 6 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
-------------------------------------------------------------------------------
At time t = 9 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
===============================================================================
A:ALA-1>monitor>filter# mac 50 entry 10 interval 3 repeat 3 rate
===============================================================================
Monitor statistics for Mac filter 50 entry 10
===============================================================================
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Rate)
-------------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
-------------------------------------------------------------------------------
At time t = 6 sec (Mode: Rate)
-------------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
-------------------------------------------------------------------------------
At time t = 9 sec (Mode: Rate)
-------------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
===============================================================================
A:ALA-1>monitor>filter#
lag lag-id [lag-id...(up to 5 max)] [interval seconds] [repeat repeat] [absolute | rate]
monitor
Supported on all 7210 SAS platforms as described in this document
This command monitors traffic statistics for Link Aggregation Group (LAG) ports. Statistical information for the specified LAG IDs is displayed at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified LAG ID. The subsequent statistical information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the rate per second for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor commands display the selected statistics according to the configured number of times at the interval specified.
Specifies the number of the LAG.
Specifies the interval for each display in seconds.
Specifies how many times the command is repeated.
Keyword to display the raw statistics, without processing. No calculations are performed on the delta or rate statistics.
Keyword to display the rate per second for each statistic instead of the delta.
The following output is an example of LAG statistics.
Sample outputA:ALA-12# monitor lag 2
===============================================================================
Monitor statistics for LAG ID 2
===============================================================================
Port-id Input Input Output Output Input Output
Bytes Packets Bytes Packets Errors Errors
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
1/1/1 2168900 26450 64 1 0 0
1/1/2 10677318 125610 2273750 26439 0 0
1/1/3 2168490 26445 0 0 0 0
-------------------------------------------------------------------------------
Totals 15014708 178505 2273814 26440 0 0
-------------------------------------------------------------------------------
At time t = 5 sec (Mode: Delta)
-------------------------------------------------------------------------------
1/1/1 0 0 0 0 00
1/1/2 258 3 86 1 0 0
1/1/3 82 1 0 0 0 0
-------------------------------------------------------------------------------
Totals 340 4 86 1 0 0
===============================================================================
A:ALA-12#
management-access-filter
monitor
Supported on all 7210 SAS platforms as described in this document
Commands in this context monitor management access filters. These filters are configured in the config>system>security>mgmt-access-filter context.
ip entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
monitor>management-access-filter
Supported on all 7210 SAS platforms as described in this document
This command monitors statistics for the MAF IP filter entry.
Specifies an existing IP MAF entry ID.
Specifies the interval for each display in seconds.
Specifies how many times the command is repeated.
Keyword to display the raw statistics, without processing. No calculations are performed on the delta or rate statistics.
Keyword to display the rate per second for each statistic instead of the delta.
ipv6 entry-id [interval seconds] [repeat repeat] [absolute | rate]
monitor>management-access-filter
Supported on all 7210 SAS platforms as described in this document
This command monitors statistics for the MAF IPv6 filter entry.
Specifies an existing IP MAF entry ID.
Configures the interval for each display in seconds.
Configures how many times the command is repeated.
The raw statistics are displayed, without processing. No calculations are performed on the delta or rate statistics.
The rate-per-second for each statistic is displayed instead of the delta.
port port-id [port-id...(up to 5 max)] [interval seconds] [repeat repeat] [absolute | rate]
monitor
Supported on all 7210 SAS platforms as described in this document
This command enables port traffic monitoring. The specified ports statistical information displays at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified ports. The subsequent statistical information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the rate per second for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor commands display the selected statistics according to the configured number of times at the interval specified.
Specifies up to 5 port IDs.
Specifies the interval for each display in seconds.
Specifies how many times the command is repeated.
Keyword to display the raw statistics, without processing. No calculations are performed on the delta or rate statistics.
Keyword to display the rate per second for each statistic instead of the delta.
The following output is an example of port statistics.
Sample outputA:ALA-12>monitor# port 1/1/4 interval 3 repeat 3 absolute
===============================================================================
Monitor statistics for Port 1/1/4
===============================================================================
Input Output
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Octets 0 0
Packets 39 175
Errors 0 0
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Octets 0 0
Packets 39 175
Errors 0 0
-------------------------------------------------------------------------------
At time t = 6 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Octets 0 0
Packets 39 175
Errors 0 0
-------------------------------------------------------------------------------
At time t = 9 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Octets 0 0
Packets 39 175
Errors 0 0
===============================================================================
A:ALA-12>monitor#
A:ALA-12>monitor# port 1/1/4 interval 3 repeat 3 rate
===============================================================================
Monitor statistics for Port 1/1/4
===============================================================================
Input Output
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Octets 0 0
Packets 39 175
Errors 0 0
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Rate)
-------------------------------------------------------------------------------
Octets 0 0
Packets 0 0
Errors 0 0
-------------------------------------------------------------------------------
At time t = 6 sec (Mode: Rate)
-------------------------------------------------------------------------------
Octets 0 0
Packets 0 0
Errors 0 0
-------------------------------------------------------------------------------
At time t = 9 sec (Mode: Rate)
-------------------------------------------------------------------------------
Octets 0 0
Packets 0 0
Errors 0 0
===============================================================================
A:ALA-12>monitor#
service
monitor
Supported on all 7210 SAS platforms as described in this document
Commands in this context configure criteria to monitor specific service SAP criteria.
id service-id
monitor>service
Supported on all 7210 SAS platforms as described in this document
This command displays statistics for a specific service, specified by the service-id, at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the service-id. The subsequent statistical information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the rate per second for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor commands display the selected statistics according to the configured number of times at the interval specified.
Specifies the unique service identification number of the service in the service domain.
sap sap-id [interval seconds] [repeat repeat] [absolute | rate]
monitor>service>id
Supported on all 7210 SAS platforms as described in this document
This command monitors statistics for a SAP associated with this service.
This command displays statistics for a specific SAP, identified by the port-id and encapsulation value, at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the SAP. The subsequent statistical information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the rate per second for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor commands display the selected statistics according to the configured number of times at the interval specified.
Specifies the physical port identifier portion of the SAP definition.
Specifies the physical port ID in the slot/mda/port format.
If the card in the slot has Media Dependent Adapters (MDAs) installed, the port-id must be in the slot_number/MDA_number/port_number format. For example, 1/2/3 specifies port 3 on MDA 2 in slot 1.
Specifies the encapsulation value used to identify the SAP on the port or sub-port. If this parameter is not specifically defined, the default value is 0.
Specifies the interval for each display in seconds.
Specifies how many times the command is repeated.
Keyword to display the absolute rate per second value for each statistic.
Keyword to display the rate per second for each statistic instead of the delta.
The following output is an example of SAP statistics.
Sample outputA:7210SAS-D>monitor>service>id# sap 1/1/1:100
===============================================================================
Monitor statistics for Service 10000 SAP 1/1/1:100
===============================================================================
-------------------------------------------------------------------------------
At time t = 110 sec (Mode: Delta)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Ingress QoS Classifier Usage
-------------------------------------------------------------------------------
Classifiers Allocated: 16 Meters Allocated : 8
Classifiers Used : 2 Meters Used : 2
-------------------------------------------------------------------------------
Sap Statistics
-------------------------------------------------------------------------------
Packets Octets
Ingress Stats: 1013264 0
Egress Stats: 163674 0
-------------------------------------------------------------------------------
Sap STP Statistics
-------------------------------------------------------------------------------
Forward transitions : 0 Bad BPDUs rcvd : 0
Cfg BPDUs rcvd : 0 Cfg BPDUs tx : 0
TCN BPDUs rcvd : 0 TCN BPDUs tx : 0
RST BPDUs rcvd : 0 RST BPDUs tx : 0
MST BPDUs rcvd : 0 MST BPDUs tx : 0
-------------------------------------------------------------------------------
Sap per Meter Stats
-------------------------------------------------------------------------------
Packets Octets
Ingress Meter 1 (Unicast)
For. InProf : 0 0
For. OutProf : 210645 0
Ingress Meter 11 (Multipoint)
For. InProf : 0 0
For. OutProf : 87238 0
===============================================================================
A:7210SAS-D>monitor>service>id#
sdp {sdp-id | far-end ip-address} [interval seconds] [repeat repeat] [absolute | rate]
monitor>service>id
7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C
This command monitors statistics for an SDP binding associated with this service.
Specifies the SDP identifier.
Keyword to display the absolute rate per second value for each statistic.
Specifies the system address of the far-end 7210 SAS for the SDP in dotted decimal notation.
Specifies the interval for each display in seconds.
Keyword to display the rate per second for each statistic instead of the delta.
Specifies how many times the command is repeated.
The following output is an example of SDP statistics.
Sample outputA:ALA-12# monitor service id 100 sdp 10 repeat 3
===============================================================================
Monitor statistics for Service 100 SDP binding 10
===============================================================================
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
-------------------------------------------------------------------------------
At time t = 11 sec (Mode: Delta)
-------------------------------------------------------------------------------
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
-------------------------------------------------------------------------------
At time t = 22 sec (Mode: Delta)
-------------------------------------------------------------------------------
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
-------------------------------------------------------------------------------
At time t = 33 sec (Mode: Delta)
-------------------------------------------------------------------------------
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
===============================================================================
A:ALA-12#