Peer

Configuration of an NTP peer configures symmetric active mode for the configured peer. Although any system can be configured to peer with any other NTP node, Nokia recommends to configure authentication and to configure known time servers as their peers. Use the no form of the command to remove the configured peer.

Use the following CLI syntax to configure symmetric active mode.

config>system>time>ntp
        peer ip-address[version version][key-id key-id]
        [prefer]

Example: Command usage to configure symmetric active mode

config>system>time>ntp# 
    config>system>time>ntp# peer 192.168.1.1 key-id 1
    config>system>time>ntp# no shutdown
Example

The following is a sample configuration output of NTP enabled with the peer command configured.

A:sim1>config>system>time>ntp# info
----------------------------------------------
            no shutdown
            peer 192.168.1.1 key-id 1 
----------------------------------------------
A:sim1>config>system>time>ntp#