Post-boot configuration extension files

Two post-boot configuration extension files are supported and are triggered when either a successful or failed boot configuration file is processed. The commands specify URLs for the CLI scripts that are run following the completion of the boot-up configuration. A URL must be specified or no action is taken. The commands are persistent between router reboots and are included in the configuration saves (admin save).

Use the following syntax to specify the CLI scripts that are tun following the completion of the boot-up configuration.

config>system 
        boot-bad-exec file-url
        boot-good-exec file-url

Example

The following example shows the command usage to specify the CLI scripts that are run following the completion of the boot-up configuration.

config>system# boot-bad-exec ftp://test:test@192.168.xx.xxx/./
    fail.cfg
    config>system# boot-good-exec ftp://test:test@192.168.xx.xxx/./
    ok.cfg

Example: Command output

*A:ALA# configure system 
*A:ALA>config>system# info 
----------------------------------------------
#--------------------------------------------------
echo "System Configuration"
#--------------------------------------------------
        name "ALA"
        boot-good-exec "cf1:\good.cfg"
        boot-bad-exec "cf1:\bad.cfg"
        snmp
            shutdown
        exit
        login-control
            idle-timeout disable
            pre-login-message "ala-1" name
        exit
        time
            ntp
                authentication-key 1 key "SV3BxZCsIvI" hash type message-digest 
                server 10.135.16.130 
                peer 10.0.0.1 key-id 1 
                no shutdown
            exit
            sntp
                server-address 10.135.16.90 preferred 
                no shutdown           
            exit
            zone UTC 
        exit
        thresholds
            rmon
            exit
        exit
#--------------------------------------------------
echo "System Security Configuration"
#--------------------------------------------------
        security
            hash-control read-version all write-version 1 
            telnet-server
            ftp-server
            snmp
                community "private" rwa version both
                community "public" r version both
            exit
            source-address
                application ftp 10.135.16.97
                application snmptrap 10.135.16.97
                application ping 10.135.16.97
                application dns 10.135.16.97
            exit
        exit
----------------------------------------------
*A:ALA>config>system#