Server-address

The server-address command configures an SNTP server for SNTP unicast client mode.

Use the following CLI syntax to configure an SNTP server for unicast client mode.

config>system>time>sntp#
        server-address ip-address version version-number] [normal|preferred] [interval seconds]

Example: Command usage to configure an SNTP server for unicast client mode

config>system>time>sntp#
    config>system>time# server-address 10.10.0.94 version
        1 preferred interval 100

Example

The following is a sample configuration output of SNTP enabled with the server-address command configured.

A:ALA-12>config>system>time# info
----------------------------------------------
            sntp
                server-address 10.10.0.94 version 1 preferred interval 100
                no shutdown
            exit
            dst-zone PT start-date 2006/04/04 12:00 end-date 2006/10/25 12:00
            zone GMT
----------------------------------------------
A:ALA-12>config>system>time#