The 7210 SAS-Dxp 12p (2SFP+ 4SFP 6Tx) is a service-aware Layer 2 device with support for QinQ Layer 2 uplinks. The device can be used as an Ethernet demarcation device, Ethernet access device, and mobile back-haul unit with support for six 10/100/1000 Base-T fixed copper ports, four 100/1000 SFP ports, and two 1GE/10GE SFP+ ports, with line-rate switching on all the ports.
On the 7210 SAS-Dxp 12p, the 10 Mb/s port speed is not supported for an SFP port using a copper SFP.
The following figure shows the location of the console port on the 7210 SAS-Dxp 12p AC variant front panel.
The following figure shows the location of the console port on the 7210 SAS-Dxp 12p ETR AC variant front panel.
The following figure shows the location of the console port on the 7210 SAS-Dxp 12p DC variant front panel.
The following figure shows the location of the console port on the 7210 SAS-Dxp 12p ETR DC variant front panel.
