The 7210 SAS-Dxp 24p (2SFP+ 6SFP 16Tx) is a service-aware Layer 2 device with support for QinQ Layer 2 uplinks. The device can be used as an Ethernet demarcation device, Ethernet access device, and mobile back-haul unit with support for sixteen 10/100/1000 Base-T fixed copper ports, six 1 GE SFP ports, and two 1 GE/10 GE SFP+ ports, with line-rate switching on all the ports.
Note:
On the 7210 SAS-Dxp 24p, the 10 Mb/s port speed is not supported for an SFP port using a copper SFP.
The following figure shows the location of the console port on the 7210 SAS-Dxp 24p front panel.
Figure: 7210 SAS-Dxp 24p front panel console port
