[no] time-range name [create]
config>system>cron
Supported on all 7210 SAS platforms as described in this document
This command configures a time range.
The no form of this command removes the name from the configuration.
Specifies a name for the time range, up to 32 characters.
absolute start start-absolute-time end end-absolute-time
no absolute start absolute-time
config>system>cron>time-range
Supported on all 7210 SAS platforms as described in this document
This command configures an absolute time interval that does not repeat.
The no form of this command removes the absolute time range from the configuration.
Specifies starting parameters for the absolute time-range.
Specifies end parameters for the absolute time-range.
daily start start-time-of-day end end-time-of-day
no daily start start-time-of-day
config>system>cron>time-range
Supported on all 7210 SAS platforms as described in this document
This command configures the start and end of a schedule for every day of the week. To configure a daily time-range across midnight, use a combination of two entries. An entry that starts at hour zero takes over from an entry that ends at hour 24.
The no form of this command removes the daily time parameters from the configuration.
Specifies the starting time for the time range.
Specifies the ending time for the time range.
weekdays start start-time-of-day end end-time-of-day
no weekdays start start-time-of-day
config>system>cron>time-range
Supported on all 7210 SAS platforms as described in this document
This command configures the start and end of a weekday schedule.
The no form of this command removes the weekday parameters from the configuration.
Specifies the starting time for the time range.
Specifies the ending time for the time range.
weekend start start-time-of-day end end-time-of-day
no weekend start start-time-of-day
config>system>cron>time-range
Supported on all 7210 SAS platforms as described in this document
This command configures a time interval for every weekend day in the time range.
The resolution must be at least one minute apart, for example, start at 11:00 and end at 11:01. An 11:00 start and end time is invalid. This example configures a start at 11:00 and an end at 11:01 on both Saturday and Sunday.
The no form of this command removes the weekend parameters from the configuration.
Specifies the starting time for the time range.
Specifies the ending time for the time range.
weekly start start-time-in-week end end-time-in-week
no weekly start start-time-in-week
config>system>cron>time-range
Supported on all 7210 SAS platforms as described in this document
This command configures a weekly periodic interval in the time range.
The command configures the start and end of a schedule for the same day every week, for example, every Friday. The start and end dates must be the same. The resolution must be at least one minute apart, for example, start at 11:00 and end at 11:01. A start time and end time of 11:00 is invalid.
The no form of this command removes the weekly parameters from the configuration.
no time-range
Specifies the start day and time of the week.
Specifies the end day and time of the week.