hold-on-neighbor-failure multiplier
no hold-on-neighbor-failure
config>redundancy>multi-chassis>peer>mc-ep
7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C
This command specifies the number of keep-alive intervals that the local node waits for packets from the MC-EP peer before assuming failure. After this time interval, all the mc-endpoints configured in the service revert to single chassis behavior, activating the best local pseudowire.
The no form of this command reverts the multiplier to the default value.
3
Specifies the hold time applied on neighbor failure.