Modifying a local mirrored service

Existing mirroring parameters can be modified in the CLI. The changes are applied immediately. The service must be shut down if changes to the SAP are made.

The following shows the command usage to modify parameters for a basic local mirroring service.

Example: Modifying parameters for a basic local mirroring service

 config>mirror# mirror-dest 103
     config>mirror>mirror-dest# shutdown
     config>mirror>mirror-dest# no sap
     config>mirror>mirror-dest# sap 1/1/5 create
     config>mirror>mirror-dest>sap$ exit
     config>mirror>mirror-dest# no shutdown
     debug# mirror-source 103
     debug>mirror-source# no port 1/1/23 
     debug>mirror-source# port 1/1/7 ingress egress

Example: Configuration output of local mirrored service modifications

*A:ALA-A>config>mirror# info
----------------------------------------------
mirror-dest 103 create
            no shutdown
            sap 1/1/5 create
        exit

*A:ALA-A>debug>mirror-source# show debug mirror
debug
    mirror-source 103
        no shutdown
        port 1/1/7 egress ingress
    exit
*A:ALA-A>debug>mirror-source#