router-advertisement
no router-advertisement
config>router
7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F6C4T, 7210 SAS-K 3SFP+ 8C
This command enables router advertisement on IPV6 interfaces. By default, it is disabled for all IPv6-enabled interfaces.
The no form of this command disables router advertisement on all IPv6 interfaces.
no router-advertisement
interface ip-int-name
no interface ip-int-name
config>router>router-advertisement
7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F6C4T, 7210 SAS-K 3SFP+ 8C
This command configures router advertisement properties on a specified IPv6 interface. The interface name must already exist in the config>router>interface>ipv6 context.
The no form of this command disables the specifies IPv6 interface.
Specifies the name of an existing IPv6 interface. An interface name cannot be in the form of an IPv6 address. If the string contains special characters (such as #, $, spaces), the entire string must be enclosed within double quotes. The string must start with a letter and the max is 32 characters.
current-hop-limit number
no current-hop-limit
config>router>router-advertisement>if
7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F6C4T, 7210 SAS-K 3SFP+ 8C
This command enables the router to advertise the hop-limit in ICMPv6 Neighbor Discovery (ND) router advertisement messages.
The no form of this command disables the advertising of the hop-limit in ICMPv6 ND router advertisement messages by the router.
no current-hop-limit
Specifies the number of hop limits.
managed-configuration
no managed-configuration
config>router>router-advertisement>if
7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F6C4T, 7210 SAS-K 3SFP+ 8C
This command enables the ‟managed-config-flag” to be advertised in ICMPv6 ND router advertisement messages.
The no form of this command disables the advertising of the ‟managed-config-flag” in ICMPv6 router advertisement messages.
no managed-configuration
max-advertisement-interval seconds
no max-advertisement-interval
config>router>router-advertisement>if
7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F6C4T, 7210 SAS-K 3SFP+ 8C
This command configures the maximum interval between sending ICMPv6 ND router advertisement messages.
The no form of this command disables the setting of a maximum interval between sending ICMPv6 ND router advertisement messages.
no max-advertisement-interval
Specifies the maximum interval, in seconds.
min-advertisement-interval seconds
no min-advertisement-interval
config>router>router-advertisement>if
7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F6C4T, 7210 SAS-K 3SFP+ 8C
This command configures the minimum interval between sending ICMPv6 ND router advertisement messages.
The no form of this command disables the setting of a minimum interval between sending ICMPv6 ND router advertisement messages.
no min-advertisement-interval
Specifies the minimum interval, in seconds.
mtu mtu-bytes
no mtu
config>router>router-advertisement>interface
7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F6C4T, 7210 SAS-K 3SFP+ 8C
This command configures the MTU for sending packets to the router.
The no form of this command disables the sending of MTU in the router advertisement messages
no mtu
Specifies the MTU for the nodes to use when sending packets.
other-stateful-configuration
no other-stateful-configuration
config>router>router-advertisement>interface
7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F6C4T, 7210 SAS-K 3SFP+ 8C
This command enables the ‟other-config-flag” to be advertised in ICMPv6 ND router advertisement messages.
The no form of this command disables the advertising of the ‟other-config-flag” in ICMPv6 router advertisement messages.
no other-stateful-configuration
prefix ipv6-prefix/prefix-length
no prefix
config>router>router-advertisement>interface
7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F6C4T, 7210 SAS-K 3SFP+ 8C
This command configures the IPv6 prefix to include in router advertisement messages. To support multiple IPv6 prefixes, use multiple prefix statements.
The no form of this command disables the inclusion of an IPv6 prefix in router advertisement messages.
no prefix
The Pv6 prefix.
autonomous
no autonomous
config>router>router-advertisement>interface>prefix
7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F6C4T, 7210 SAS-K 3SFP+ 8C
This command specifies whether the prefix can be used for a stateless address autoconfiguration.
The no form of this command disables the prefix to be used for a stateless address autoconfiguration.
autonomous
on-link
no on-link
config>router>router-advertisement>interface>prefix
7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F6C4T, 7210 SAS-K 3SFP+ 8C
This command specifies whether the prefix can be used for onlink determination.
The no form of this command disables the prefix to be used for onlink determination.
on-link
preferred-lifetime [seconds | infinite]
no preferred-lifetime
config>router>router-advertisement>interface>prefix
7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F6C4T, 7210 SAS-K 3SFP+ 8C
This command configures the remaining time, in seconds, that this prefix continues to be preferred (time until deprecation). The address generated from a deprecated prefix should not be used as a source address in new communications. However, packets received on such an interface are processed as expected.
The no form of this command does disables the configuration of the time until deprecation for the prefix.
no preferred-lifetime
Specifies the remaining length of time, in seconds, that this prefix will be preferred.
Specifies that the prefix will always be preferred. A value of 4294967295 represents infinity.
valid-lifetime [seconds | infinite]
no valid-lifetime
config>router>router-advertisement>interface>prefix
7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F6C4T, 7210 SAS-K 3SFP+ 8C
This command specifies the length of time, in seconds, that the prefix is valid for the purpose of onlink determination. The address generated from an invalidated prefix should not appear as the destination or source address of a packet.
The no form of this command disables configuration of the time that the prefix is valid for the purpose of onlink determination.
no valid-lifetime
Specifies the remaining length of time, in seconds, that this prefix will be valid.
Specifies that the prefix will always be valid. A value of 4294967295 represents infinity.
reachable-time milli-seconds
no reachable-time
config>router>router-advertisement>interface
7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F6C4T, 7210 SAS-K 3SFP+ 8C
This command configures how long the router should be considered reachable by other nodes on the link after receiving a reachability confirmation.
The no form of this command disables the configuration of how long the router should be considered reachable.
no reachable-time
Specifies the amount of time, in milliseconds, that the router will be considered reachable.
retransmit-time milli-seconds
no retransmit-time
config>router>router-advertisement>interface
7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F6C4T, 7210 SAS-K 3SFP+ 8C
This command configures the retransmission frequency of neighbor solicitation messages.
The no form of this command disables the configuration of the retransmission frequency of neighbor solicitation messages.
no retransmit-time
Specifies the length of time, in milliseconds, that a host should wait before retransmitting neighbor solicitation messages.
router-lifetime seconds
no router-lifetime
config>router>router-advertisement>interface
7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F6C4T, 7210 SAS-K 3SFP+ 8C
This command configures the router lifetime.
The no form of this command disables the configuration of the router lifetime.
no router-lifetime
Specifies the router lifetime, in seconds.