Modifying an IP filter policy

To access a specific IP filter, you must specify the filter ID. Use the no form of this command to remove the command parameters or return the parameter to the default setting.

config>filter>ip-filter# description "New IP filter info"
    config>filter>ip-filter# entry 2 create
    config>filter>ip-filter>entry$ description "new entry"
    config>filter>ip-filter>entry# action drop
    config>filter>ip-filter>entry# match dst-ip 10.10.10.104/32
    config>filter>ip-filter>entry# exit
    config>filter>ip-filter#

A:ALA-7>config>filter# info
----------------------------------------------
...
        ip-filter 11 create
            description "New IP filter info"
            scope exclusive
            entry 1 create
                match
                    dst-ip 10.10.10.91/24
                    src-ip 10.10.10.106/24
                exit
                action
                    drop
            exit
            entry 2 create
                description "new entry"
                match
                    dst-ip 10.10.10.104/32
                exit
                action
                    drop
            exit
            entry 10 create
                match
                    dst-ip 10.10.10.91/24
                    src-ip 10.10.0.100/24
                exit
                action
                    drop
            exit
            entry 15 create
                description "no-91"
                match
                    dst-ip 10.10.10.91/24
                    src-ip 10.10.10.103/24
                exit
                action
                    forward
            exit
            entry 30 create
                match
                    dst-ip 10.10.10.91/24
                    src-ip 10.10.0.200/24
                exit
                action
                    forward
            exit
        exit
..
----------------------------------------------
A:ALA-7>config>filter#