ip ip-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
monitor>filter
Supported on all 7210 SAS platforms as described in this document
This command monitors the counters associated with the IP filter policy.
Specifies the IP filter policy ID.
Specifies that only the counters associated with the specified filter policy entry will be monitored.
Specifies the interval for each display in seconds.
Specifies how many times the command is repeated.
Displays the raw statistics without processing. No calculations are performed on the delta or rate statistics.
Displays the rate-per-second for each statistic instead of the delta.
ipv6 ip-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
monitor>filter
Supported on all 7210 SAS platforms as described in this document
This command monitors the counters associated with the IPv6 filter policy.
Specifies the IP filter policy ID.
Specifies that only the counters associated with the specified filter policy entry will be monitored.
Specifies the interval for each display in seconds.
Specifies how many times the command is repeated.
Displays the raw statistics without processing. No calculations are performed on the delta or rate statistics.
Displays the rate-per-second for each statistic instead of the delta.
mac mac-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
monitor>filter
Supported on all 7210 SAS platforms as described in this document
This command monitors the counters associated with the MAC filter policy.
Specifies MAC filter policy ID.
Specifies that only the counters associated with the specified filter policy entry will be cleared.
Specifies the interval for each display in seconds.
Specifies how many times the command is repeated.
Displays the raw statistics without processing. No calculations are performed on the delta or rate statistics.
Displays the rate-per-second for each statistic instead of the delta.