copy {ip-filter | mac-filter} source-filter-id dest-filter-id dest-filter-id [overwrite]
config>filter
Supported on all 7210 SAS platforms as described in this document
This command copies existing filter list entries for a specific filter ID to another filter ID. The copy command is a configuration level maintenance tool used to create new filters using existing filters. It also allows bulk modifications to an existing policy with the use of the overwrite keyword.
If overwrite is not specified, an error will occur if the destination policy ID exists.
Specifies that the source-filter-id and the dest-filter-id are IP filter IDs.
Specifies that the source-filter-id and the dest-filter-id are MAC filter IDs.
Specifies the source filter policy from which the copy command will attempt to copy. The filter policy must exist within the context of the preceding keyword (ip-filter or mac-filter).
Specifies the destination filter policy to which the copy command will attempt to copy. If the overwrite keyword does not follow, the filter policy ID cannot already exist within the system for the filter type the copy command is issued for. If the overwrite keyword is present, the destination policy ID may or may not exist.
Specifies that the destination filter ID may exist. If it does, everything in the existing destination filter ID will be completely overwritten with the contents of the source filter ID. If the destination filter ID exists, either overwrite must be specified or an error message will be returned. If overwrite is specified, the function of copying from source to destination occurs in a ‛break before make’ manner and therefore should be handled with care.
filter-name filter-name
config>filter>ip-filter
config>filter>ipv6-filter
config>filter>mac-filter
Supported on all 7210 SAS platforms as described in this document
This command configures the filter-name attribute of a specific filter. When configured, filter-name can be used instead of filter ID to reference the specific policy in the CLI.
no filter-name
Specifies a string of up to 64 characters uniquely identifying this filter policy.
renum old-entry-id new-entry-id
config>filter>ip-filter
config>filter>ipv6-filter
config>filter>mac-filter
Supported on all 7210 SAS platforms as described in this document
This command renumbers existing MAC or IP filter entries to properly sequence filter entries. This may be required in some cases because the OS exits when the first match is found and executes the actions according to the accompanying action command. This requires that entries be sequenced correctly from most to least explicit.
Specifies the entry number of an existing entry.
Specifies the new entry-number to be assigned to the old entry.