Router commands for 7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C

config
    - router [router-name]
        - allow-icmp-redirect
        - no allow-icmp-redirect
        - allow-icmp6-redirect
        - no allow-icmp6-redirect
        - autonomous-system autonomous-system
        - no autonomous-system
        - bgp
        - no bgp
        - dhcp 
        - ecmp max-ecmp-routes
        - no ecmp 
        - if-attribute
            - admin-group group-name value group-value
            - no admin-group group-name 
            - srlg-group group-name value group-value
            - no srlg-group group-name 
        - interface ip-int-name 
        - isis
        - no isis
        - mpls-labels
            - static-label-range static-range
            - no static-label-range
            - sr-labels start start-value end end-value
            - no sr-labels
        - ospf
        - no ospf
        - ospf3
        - no ospf3
        - route-next-hop-policy
            - abort
            - begin
            - commit
            - [no] template name
                - description description-string
                - no description
                - [no] exclude-group ip-admin-group-name
                - include-group ip-admin-group-name [pref preference]
                - no include-group ip-admin-group-name
                - nh-type {ip | tunnel}
                - no nh-type
                - protection-type {link | node}
                - no protection-type
                - [no] srlg-enable
        - router-id ip-address
        - no router-id 
        - [no] static-route {ip-prefix/prefix-length | ip-prefix netmask} [preference preference] [metric metric] [tag tag] [enable | disable] next-hop ip-int-name | ip-address [bfd-enable | {cpe-check cpe-ip-address [interval seconds] [drop-count count] [log]} | {prefix-list prefix-list-name [all | none]}]] [ldp-sync] [description description] 
        - [no] static-route {ip-prefix/prefix-length | ip-prefix netmask} [preference preference] [metric metric] [tag tag] [enable | disable] indirect ip-address [{cpe-check cpe-ip-address [interval seconds] [drop-count count] [log]} | {prefix-list prefix-list-name [all | none]}] [description description]
        - [no] static-route {ip-prefix/prefix-length | ip-prefix netmask} [preference preference] [metric metric] [tag tag] [enable | disable] black-hole [prefix-list prefix-list-name [all | none]] [description description]
        - [no] static-route {ip-prefix/prefix-length | ip-prefix netmask} black-hole [preference preference] [metric metric] [tag tag] [enable | disable] [description description]
        - no interface interface-name
        - [no] triggered-policy
    - router
        - sgt-qos
            - application dscp-app-name dscp {dscp-value | dscp-name
            - application dot1p-app-name dot1p dot1p-priority
            - no application 
            - dscp dscp-name fc fc-name 
            - no dscp dscp-name 
Note:

See the 7210 SAS-K 2F1C2T, K 2F6C4T, K 3SFP+ 8C Quality of Service Guide section ‟Self-Generated Traffic Commands for 7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C” for information about self-generated traffic and applicable command descriptions.