Configuring global VPRN parameters

Refer to VPRN services command reference for 7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C for CLI syntax to configure VPRN parameters.

The following is a sample VPRN service with configured parameters.

*A:ALA-1>config>service# info
----------------------------------------------
...
vprn 1 customer 1 create
exit
            no enable-bgp-vpn-backup
            no vrf-target
            no static-route-hold-down
            no ptp
            mvpn
                provider-tunnel
                exit
                no vrf-target
            exit
exit
...
----------------------------------------------
*A:ALA-1>config>service#