Configuring VPRN IPv6 neighbor discovery parameters

Use the following syntax to configure IPv6 neighbor discovery parameters for a VPRN service.

— config>service# vprn service-id [customer customer-id]
    — ipv6
        — reachable-time seconds
        — stale-time seconds

Example:

— A:SAS>config>service# vprn 20
    — A:SAS>config>service>vprn$ ipv6
    — A:SAS>config>service>vprn>ipv6# reachable-time 30
    — A:SAS>config>service>vprn>ipv6# stale-time 14400
    — A:SAS>config>service>vprn>ipv6# exit
    — A:SAS>config>service>vprn# exit