[no] shutdown
config>eth-cfm>mep
Supported on all 7210 SAS platforms as described in this document
This command administratively disables an entity. When disabled, an entity does not change, reset, or remove any configuration settings or statistics.
The operational state of the entity is disabled, as well as the operational state of any entities contained within. Many objects must be shut down before they may be deleted.
Services are created in the administratively down (shutdown) state. When a no shutdown command is entered, the service becomes administratively up, then tries to enter the operationally up state. Default administrative states for services and service entities is described as follows in Special Cases.
The no form of this command places the entity into an administratively enabled state.
While the service is shut down, all customer packets are dropped and counted as discards for billing and debugging purposes.
description description-string
no description
config>service>customer
Supported on all 7210 SAS platforms as described in this document
This command creates a text description stored in the configuration file for a configuration context.
This command associates a text string with a configuration context to help identify the content in the configuration file.
The no form of this command removes the string from the configuration.
Specifies the description character string. Allowed values are any string up to 80 characters composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes.