[no] shutdown
config>service>ies
config>service>ies>if
7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C
This command administratively disables an entity. When disabled, an entity does not change, reset, or remove any configuration settings or statistics. The operational state of the entity is disabled as well as the operational state of any entities contained within. Many objects must be shut down before they may be deleted.
Services are created in the administratively down (shutdown) state. When a no shutdown command is entered, the service becomes administratively up and then tries to enter the operationally up state. Default administrative states for services and service entities is described as follows in Special Cases.
Refer to the 7210 SAS-D, Dxp, K 2F1C2T, K 2F6C4T, K 3SFP+ 8C Basic System Configuration Guide for information about how to allocate addresses toward IP subnets using the configure system resource-profile router max-ip-subnets CLI command.
Before using IPv6, resources for IPv6 routes must be allocated. Refer to the 7210 SAS-D, Dxp, K 2F1C2T, K 2F6C4T, K 3SFP+ 8C Basic System Configuration Guide for information about how to use the configure system resource-profile router max-ipv6-routes CLI command.
The no form of this command places the entity into an administratively enabled state.
The default administrative status of an IES service is down. While the service is down, all its associated virtual router interfaces are operationally down. The administrative state of the service is not reflected in the administrative state of the virtual router interface.
For example if the following are true:
an IES service is operational and an associated interface is shut down
the IES service is administratively shutdown and brought back up
the interface shutdown remains in administrative shutdown state
A service is regarded as operational if one IP Interface is operational.
When the IP interface is shut down, it enters the administratively and operationally down states. For a SAP bound to the IP interface, no packets are transmitted out the SAP and all packets received on the SAP are dropped while incrementing the packet discard counter.
description description-string
no description
config>service>ies
7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C
This command creates a text description stored in the configuration file for a configuration context.
The description command associates a text string with a configuration context to help identify the content in the configuration file.
The no form of this command removes the string from the configuration.
Specifies the description character string. Allowed values are any string up to 80 characters composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.