[no] shutdown
config>service>epipe
config>service>epipe>sap
config>service>epipe>sap>eth-cfm>mep
Supported on all 7210 SAS platforms as described in this document
This command administratively disables an entity. When disabled, an entity does not change, reset, or remove any configuration settings or statistics.
The operational state of the entity is disabled as well as the operational state of any entities contained within. Many objects must be shut down before they may be deleted.
Services are created in the administratively down (shutdown) state. When a no shutdown command is entered, the service becomes administratively up, then tries to enter the operationally up state.
The no form of this command places the entity into an administratively enabled state.
description description-string
no description
config>service>epipe
config>service>epipe>sap
config>service>epipe>spoke-sdp
config>connection-profile
Supported on all 7210 SAS platforms as described in this document
This command creates a text description stored in the configuration file for a configuration context. The description command associates a text string with a configuration context to help identify the content in the configuration file.
The no form of this command removes the string from the configuration.
Specifies the description character string. Allowed values are any string up to 80 characters composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes.
eth-cfm
config>service>epipe>sap
Supported on all 7210 SAS platforms as described in this document
Commands in this context configure ETH-CFM parameters.
mep mep-id domain md-index association ma-index [direction {up | down}] primary-vlan-enable
no mep mep-id domain md-index association ma-index
config>service>epipe>sap>eth-cfm
Supported on all 7210 SAS platforms as described in this document
This command provisions the maintenance endpoint (MEP).
The no form of this command reverts to the default values.
For more information about ETH-CFM support for different services, see the 7210 SAS-D, Dxp, K 2F1C2T, K 2F6C4T, K 3SFP+ 8C OAM and Diagnostics Guide.
Specifies the maintenance association endpoint identifier.
Specifies the maintenance domain (MD) index value.
Specifies the MA index value.
Specifies the direction in which the maintenance association (MEP) faces on the bridge port.
up — Sends ETH-CFM messages toward the MAC relay entity.
down — Sends ETH-CFM messages away from the MAC relay entity.
Keyword that provides a method for linking with the primary VLAN configured under the bridge-identifier for the MA. This must be configured as part of the creation step and can only be changed by deleting the MEP and recreating it. Primary VLANs are only supported under Ethernet SAPs. This parameter is only supported on the 7210 SAS-Dxp, 7210 SAS-K 2F1C2T, 7210 SAS-K 2F6C4T, and 7210 SAS-K 3SFP+ 8C.