Modifying VPRN service parameters

Use the syntax to modify VPRN parameters (VPRN services command reference for 7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C).

The following is a sample VPRN service creation output.

vprn 2 customer 1 create
            shutdown
            no description
            dhcp
            exit
            dhcp6
            exit
            no router-id
            no maximum-routes
            no maximum-ipv6-routes
            snmp
                no access
            exit
            log
            exit
            no mc-maximum-routes
            no autonomous-system
            no route-distinguisher
            auto-bind-tunnel
                resolution-filter
                    no ldp
                    no rsvp
                exit
                resolution disabled
            exit
            no enable-bgp-vpn-backup
            no vrf-target
            interface "test" create
                no description
                no enable-ingress-stats
                no enable-mac-accounting
                no tcp-mss
                cpu-protection 254
                no address
                no mac
                arp-timeout 14400
                arp-retry-timer 50
                no arp-limit
                no allow-directed-broadcasts
                icmp
                    mask-reply
                    redirects 100 10
                    unreachables 100 10
                    ttl-expired 100 10
                exit
                dhcp
                    shutdown
                    no description
                    no option
                    no server
                    no trusted
                    no relay-proxy
                    no gi-address
                    no relay-plain-bootp
                exit