show
- service
- egress-label start-label [end-label]
- ingress-label start-label [[end-label]
- id service-id
- all
- sap [sap-id [detail]]
- sdp [sdp-id | far-end ip-address] [detail]
- sap-using [sap sap-id]
- sap-using interface [ip-address | ip-int-name]
- sap-using [ingress | egress] filter filter-id
- sap-using [ingress | egress] qos-policy qos-policy-id
- sdp-using [sdp-id | far-end ip-address] [detail | keep-alive-history]
- sdp-using [sdp-id[:vc-id]
- service-using [vprn] [sdp sdp-id] [customer customer-id]
show
- router [vprn-service-id]
- aggregate [family] [active]
- arp [ip-int-name | ip-address[/mask] | mac ieee-mac-address | sumary] [local | dynamic | static | managed]
- bgp
- damping [ip-prefix[/prefix-length]] [decayed|history|suppressed] [detail] [ipv4]
- damping [ip-prefix[/prefix-length]] [decayed|history|suppressed] [detail] vpn-ipv4
- group [name] [detail]
- neighbor [ip-address [detail]]
- neighbor [as-number [detail]]
- neighbor ip-address [family] filter1 [brief]
- neighbor ip-address [family] filter2
- neighbor as-number [family] filter2
- neighbor ip-address orf filter3
- neighbor ip-address graceful-restart
- paths
- routes [family family] [prefix [detail | longer]]
- routes [family family] [prefix [hunt | brief]]
- routes [family family] [community comm-id]
- routes [family family] [aspath-regex reg-ex1]
- routes [family] [ipv6-prefix[/prefix-length] [detail | longer]|[hunt [brief]]]
- summary [all]
- interface [{[ip-address | ip-int-name] [detail]} | summary
- route-table [ip-address[/mask] [longer | best]] | [protocol protocol] | [summary]
- static-arp [ip-address | ip-int-name | mac ieee-mac-address]
- static-route [ip-prefix /mask] | [preference preference] | [next-hop ip-address] [detail]
- tunnel-table [ip-address[/mask] [protocol protocol | sdp sdp-id]
- tunnel-table [summary]
show
- router
- sgt-qos
- application
- dscp-map
See the 7210 SAS-K 2F1C2T, K 2F6C4T, K 3SFP+ 8C Quality of Service Guide section ‟Network QoS Policy Command Reference, Show Commands” for descriptions of the show>router>sgt-qos commands.