Tools perform commands for 7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C

tools

Syntax

tools

Context

root

Platforms

7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C

Description

Commands in this context enable useful tools for debugging purposes.

perform

Syntax

perform

Context

tools

Platforms

7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C

Description

Commands in this context enable tools to perform specific tasks.

service

Syntax

services

Context

tools>perform

Platforms

7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C

Description

Commands in this context configure tools for services.

id

Syntax

id service-id

Context

tools>perform>service

Platforms

7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C

Description

This command specifies a service for which to configure tools.

Parameters

service-id

Specifies an existing service ID.

Values: 1 to 2147483647

endpoint

Syntax

endpoint endpoint-name

Context

tools>perform>service>id

Platforms

7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C

Description

This command configures tools for a specific VLL service endpoint.

Parameters

endpoint-name: Specifies an existing VLL service endpoint name.

force-switchover

Syntax

force-switchover sdp-id:vc-id

no force-switchover

force-switchover spoke-sdp-fec [1..4294967295]

Context

tools>perform>service>id>endpoint

Platforms

7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C

Description

This command forces a switch of the active spoke-SDP for the specified service.

Parameters

sdp-id

Specifies an existing spoke-SDP ID for the service.

Values: 1 to 17407

vc-id

Specifies a virtual circuit ID.

Values: 1 to 4294967295

spoke-sdp-fec spoke-sdp-fec-id: Specifies the spoke-SDP FEC ID for a FEC129 AII Type 2 spoke-SDP. This parameter is mutually exclusive with the sdp:vc-id used for a FEC 128 spoke-SDP4.

Output

The following output is an example of service endpoint information.

Sample output

*A:Dut-B# show service id 1 endpoint
===============================================================================
Service 1 endpoints
===============================================================================
Endpoint name : mcep-t1
Description : (Not Specified)
Revert time : 0
Act Hold Delay : 0
Ignore Standby Signaling : false
Suppress Standby Signaling : false
Block On Mesh Fail : true
Multi-Chassis Endpoint : 1
MC Endpoint Peer Addr : 10.1.1.3
Psv Mode Active : No
Tx Active : 221:1(forced)
Tx Active Up Time : 0d 00:00:17
Revert Time Count Down : N/A
Tx Active Change Count : 6
Last Tx Active Change : 02/14/2009 00:17:32
-------------------------------------------------------------------------------
Members
-------------------------------------------------------------------------------
Spoke-sdp: 221:1 Prec:1 Oper Status: Up
Spoke-sdp: 231:1 Prec:2 Oper Status: Up
================================================================================
*A:Dut-B#

eval-pw-template

Syntax

eval-pw-template policy-id [allow-service-impact]

Context

tools>perform>service

Platforms

7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C

Description

This command reevaluates the pseudowire template policy.

Parameters

policy-id

Specifies the pseudowire template policy.

Values: 1 to 2147483647

allow-service-impact: Keyword to reevaluate the pseudowire template even if the service is impacted.

eval-expired-fec

Syntax

eval-expired-fec spoke-sdp-fec-id

eval-expired-fec all

Context

tools>perform>service>pw-routing

Platforms

7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C

Description

This command resets the retry counter and retry timer for the specified spoke-SDP and attempts to reestablish the spoke-SDP.

spoke-sdp-fec-release

Syntax

spoke-sdp-fec-release global-id[:prefix[:ac-id]]

Context

tools>perform>service

Platforms

7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C

Description

This command clears the MS-PW bindings associated with a particular SAII or TAII on an SPE.