id service-id
clear>service
clear>service>statistics
Supported on all 7210 SAS platforms as described in this document
This command clears commands for a specific service.
Specifies the ID that uniquely identifies a service.
fdb {all | mac ieee-address | sap sap-id]
clear>service>id
Supported on all 7210 SAS platforms as described in this document
This command clears FDB entries for the service.
Clears all FDB entries.
Clears only FDB entries in the FDB table with the specified 48-bit MAC address. The MAC address can be expressed in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
Specifies the physical port identifier portion of the SAP definition. See Common CLI command descriptions for command syntax.
sap sap-id {all | counters | stp}
clear>service>statistics
Supported on all 7210 SAS platforms as described in this document
This command clears statistics for the SAP bound to the service.
See Common CLI command descriptions for command syntax.
Clears all queue statistics and STP statistics associated with the SAP.
Clears all queue statistics associated with the SAP.
counters
clear>service>statistics>id
Supported on all 7210 SAS platforms as described in this document
This command clears all traffic queue counters associated with the service ID.
stp
clear>service>statistics>id
Supported on all 7210 SAS platforms as described in this document
Clears all spanning tree statistics for the service ID.
detected-protocols {all | sap sap-id}
clear>service>id>stp
Supported on all 7210 SAS platforms as described in this document
RSTP automatically falls back to STP mode when it receives an STP BPDU. This command forces the system to revert to the default RSTP mode on the SAP.
Clears all detected protocol statistics.
Clears the specified lease state SAP information. See Common CLI command descriptions for command syntax.
igmp-snooping
clear>service>id
Supported on all 7210 SAS platforms as described in this document
Commands in this context clear IGMP snooping data.
port-db [sap sap-id] [group grp-address]
clear>service>id>igmp-snooping
Supported on all 7210 SAS platforms as described in this document
This command clears the information about the IGMP snooping port database for the VPLS service.
Clears IGMP snooping statistics matching the specified SAP ID and optional encapsulation value. See Common CLI command descriptions for command syntax.
Clears IGMP snooping statistics matching the specified group address.
querier
clear>service>id>igmp-snooping
Supported on all 7210 SAS platforms as described in this document
This command clears the information about the IGMP snooping queriers for the VPLS service.
statistics { all | sap sap-id}
clear>service>id>snooping
Supported on all 7210 SAS platforms as described in this document
This command clears IGMP snooping statistics.
Clears all statistics for the service ID.
Clears statistics for the specified SAP ID.