interface [ip-int-name | ip-addr] [icmp]
clear>router
7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C
This command clears IP interface statistics.
If no IP interface is specified either by IP interface name or IP address, the command performs the clear operation on all IP interfaces.
Specifies the IP interface name or IP interface address.
Specifies to reset the ICMP statistics for the IP interfaces used for ICMP rate limit.
damping [[ip-prefix/mask] [neighbor ip-address]] | [group name]
clear>router>bgp
7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C
This command clears or resets the route damping information for received routes.
Clears damping information for entries that match the IP prefix and mask length.
Clears damping information for entries received from the BGP neighbor.
Clears damping information for entries received from any BGP neighbors in the peer group.
flap-statistics [[ip-prefix/mask] [neighbor ip-addr]] | [group group-name] | [regex reg-exp] | [policy policy-name]
clear>router>bgp
7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C
This command clears route flap statistics.
Clears route flap statistics for entries that match the specified IP prefix and mask length.
Clears route flap statistics for entries received from the specified BGP neighbor.
Clears route flap statistics for entries received from any BGP neighbors in the specified peer group.
Clears route flap statistics for all entries which have the regular expression and the AS path that matches the regular expression.
Clears route flap statistics for entries that match the specified route policy.
neighbor {ip-addr | as as-number | external | all} [soft | soft-inbound | statistics]
clear>router>bgp
7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C
This command resets the specified BGP peer or peers. This can cause existing BGP connections to be shut down and restarted.
Resets the BGP neighbor with the specified IP address.
Resets all BGP neighbors with the specified peer AS.
Resets all eBGP neighbors.
Resets all BGP neighbors.
Specifies that BGP neighbors reevaluate all routes in the local-RIB against the configured export policies.
Specifies that BGP neighbors reevaluate all routes in the RIB-In against the configured import policies.
Specifies the BGP neighbor statistics.
protocol
clear>router>bgp
7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C
This command resets the entire BGP protocol. If the ASN was previously changed, the BGP ASN does not inherit the new value.
id service-id
clear>service
clear>service>statistics
7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C
This command clears commands for a specific service.
Specifies the ID that uniquely identifies a service.
sap sap-id {all | counters | stp}
clear>service>statistics
7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C
This command clears SAP statistics for a SAP.
Specifies the physical port identifier portion of the SAP definition. See Common CLI command descriptions for command syntax.
spoke-sdp sdp-id:vc-id ingress-vc-label
clear>service>id
7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C
This command clears and resets the spoke-SDP bindings for the service.
Specifies the spoke-SDP ID to be reset.
Specifies the virtual circuit ID on the SDP ID to be reset.
sdp sdp-id keep-alive
clear>service>statistics
7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C
This command clears keepalive statistics associated with the SDP ID.
Specifies the SDP ID for which to clear keepalive statistics.
counters
clear>service>statistics>id
7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C
This command clears all traffic queue counters associated with the service ID.
spoke-sdp sdp-id[:vc-id] {all | counters | stp}
clear>service>statistics>id
7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C
This command clears statistics for the spoke-SDP bound to the service.
Specifies the spoke-SDP ID for which to clear statistics.
Specifeis the virtual circuit ID on the SDP ID to be reset.
Clears all queue statistics and STP statistics associated with the SDP.
Clears all queue statistics associated with the SDP.
Clears all STP statistics associated with the SDP.
stp
clear>service>statistics>id
7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C
This command clears all spanning tree statistics for the service ID.