The following information describes configuration guidelines:
On the 7210 SAS-D and 7210 SAS-Dxp, the ingress SAP counter counts both octets and packets simultaneously.
On the 7210 SAS-D, the egress SAP counter is disabled by default.
Ensure that egress SAP counters are enabled on 7210 SAS-D devices before associating accounting records of type service-egress-octets, service-egress-packets, combined-service-egress and complete-service-ingress-egress.
Before modifying the counter mode, disable account log generation. Execute the no collect-stats command. Changing the mode of the counter results in loss of previously collected counts and resets the counter.
Egress SAP statistics are not available on any of the SAPs of a port on which a dot1q SAP and dot1q default SAP configuration are present at the same time.
On the 7210 SAS-D and 7210 SAS-Dxp for VLL and VPLS services, the counter-mode of counters associated with SAP ingress meters/policers can be changed by executing the following command:
For 7210 SAS-D and 7210 SAS-Dxp devices — config>service>epipe/vpls>sap>statistics>ingress>counter-mode {in-out-profile-count | forward-drop-count}
For more information about the counter-mode command, See the 7210 SAS-D, Dxp, K 2F1C2T, K 2F6C4T, K 3SFP+ 8C Services Guide.
The statistics collected for the following accounting records vary based on the counter-mode selected:
Service-ingress-octets
Service-ingress-packets
Combined-service-ingress
Complete-service-ingress-egress