Configuring 802.1x RADIUS policies

Use the following CLI commands to configure generic authentication parameters for clients using 802.1x EAPOL. Additional parameters are configured per Ethernet port. See the 7210 SAS-D, Dxp, K 2F1C2T, K 2F6C4T, K 3SFP+ 8C Interface Configuration Guide.

To configure generic parameters for 802.1x authentication, enter the following syntax.

config>system>security
        dot1x
            radius-plcy policy-name 
                server server-index address ip-address secret key [port port]
                source-address ip-address
                no shutdown

Example: 802.1x configuration output

A:ALA-1>config>system>security# info
----------------------------------------------
            dot1x
                radius-plcy "dot1x_plcy" create
                   server 1 address 10.1.1.1 port 65535 secret "a"
                   server 2 address 10.1.1.2 port 6555 secret "a"
                   source-address 10.1.1.255
                no shutdown
...
----------------------------------------------