Copying and overwriting QoS policies

You can copy an existing slope policy, rename it with a new policy ID value, or overwrite an existing policy ID. The overwrite option must be specified or an error occurs if the destination policy ID exists.

config>qos> copy {slope-policy} source-policy-id dest-policy id [overwrite]

Example

The following is a sample output of copied policies.


*A:SAH01-051>config>qos>slope-policy# info detail
----------------------------------------------
            description "Default slope policy."
            high-slope
                shutdown
                start-avg 70
                max-avg 90
                max-prob 80
            exit
            low-slope
                shutdown
                start-avg 50
                max-avg 75
                max-prob 80
            exit
            high-slope-ring
                shutdown
                start-avg 70
                max-avg 90
                max-prob 80
            exit
            low-slope-ring
                shutdown
                start-avg 50
                max-avg 75
                max-prob 80
            exit
----------------------------------------------
*A:SAH01-051>config>qos>slope-policy#