Default network policy values for access-uplink ports on 7210 SAS-K 2F1C2T

The default network policy for access-uplink ports is identified as policy-id ‟1”. Default policies cannot be modified or deleted.

Example

The following is sample configuration output that shows the default network policy parameters.

7210SAS>config>qos>network# info
----------------------------------------------
            description "Default network-port QoS policy."
            ingress
                dot1p-classification 1
                queue 1 create
                exit
                queue 2 create
                    rate cir 25
                exit
                queue 3 create
                    rate cir 25
                exit
                queue 4 create
                    rate cir 25
                exit
                queue 5 create
                    rate cir 100
                exit
                queue 6 create
                    rate cir 100
                exit
                queue 7 create
                    rate cir 10
                exit
                queue 8 create
                    rate cir 10
                exit
                fc "af" create
                    queue 3
                    multicast-queue 3
                exit
                fc "be" create
                    queue 1
                    multicast-queue 1
                exit
                fc "ef" create
                    queue 6
                    multicast-queue 6
                exit
                fc "h1" create
                    queue 7
                    multicast-queue 7
                exit
                fc "h2" create
                    queue 5
                    multicast-queue 5
                exit
                fc "l1" create
                    queue 4
                    multicast-queue 4
                exit
                fc "l2" create
                    queue 2
                    multicast-queue 2
                exit
                fc "nc" create
                    queue 8
                    multicast-queue 8
                exit
            exit
            egress
            exit
----------------------------------------------
*7210 SAS>config>qos>network#

The following table list default network policy parameters.

Table: Network policy ID #1 defaults for access-uplink ports
Field	Default
description	Default network QoS policy.
scope	template
ingress
default-action	fc be profile out
egress
remarking	No
fc af:
dot1p-in-profile	3
dot1p-out-profile	2
fc be:
dot1p-in-profile	0
dot1p-out-profile	0
fc ef:
dot1p-in-profile	5
dot1p-out-profile	5
fc h1:
dot1p-in-profile	6
dot1p-out-profile	6
fc h2:
dot1p-in-profile	4
dot1p-out-profile	4
fc l1:
dot1p-in-profile	3
dot1p-out-profile	2
fc l2:
dot1p-in-profile	1
dot1p-out-profile	1
fc nc:
dot1p-in-profile	7
dot1p-out-profile	7

Table: Default network QoS policy ID #1 for dot1p to FC mapping for access-uplink ports
dot1p Value	FC Ingress	Profile
0	be	Out
1	l2	In
2	af	Out
3	af	In
4	h2	In
5	ef	In
6	h1	In
7	nc	In