egress
config>qos>network
Supported on all 7210 SAS platforms as described in this document
Commands in this context create or edit egress policy entries that specify the forwarding class to marking values maps to be instantiated when this policy is applied to the access-uplink port, network port, or hybrid port.
The forwarding class and profile states are mapped to marking values for all packets affected by the policy defined in this context.
[no] fc fc-name
config>qos>network>egress
Supported on all 7210 SAS platforms as described in this document
This command specifies the forwarding class name. The forwarding class name represents an egress queue. The FC name represents a CLI parent node that contains sub-commands or parameters describing the marking criteria of packets flowing through it. The fc command overrides the default parameters for that forwarding class to the values defined in the network default policy.
The no form of this command removes the forwarding class to marking value association. The forwarding class reverts to the mapping defined in the default network policy.
undefined forwarding classes default to the configured parameters in the default network policy ID 1
Specifies a case-sensitive, system-defined forwarding class name.