[no] network-queue policy-name [create]
config>qos
Supported on all 7210 SAS platforms as described in this document
This command configures a network queue policy. Network queue policies on the Ethernet port define network egress queuing.
On the 7210 SAS-K 2F1C2T, the network queue policy can be associated with access-uplink ports to define queues to be used on egress.
On the 7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C, the network queue policy can be associated with access-uplink ports and network ports to define queues to be used on egress.
default
Specifies the network queue policy. Valid names consist of any string up to 32 characters composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes.
Keyword to create a network queue policy.