The QoS Override feature support on access SAPs allows the user to override the meter parameters such as CBS, MBS, Rate (CIR and PIR), Mode, and Adaptation rule (CIR and PIR) at the SAP context.
The values are taken from the SAP-Ingress policy, when the meter parameter values are not overridden.
The configuration guidelines of QoS Override are:
QoS override commands can be used only for the meters or policers defined in the SAP-ingress policy used with access SAPs.
QoS override commands are not allowed when the attached policy is of an exclusive type.
QoS override commands are not allowed on mirror destination SAPs.
QoS override commands are not supported for service egress QoS policies used with access SAPs.
QoS override commands are not supported for ingress and egress QoS policies used with access-uplink ports.
QoS override commands are not supported ingress and egress QoS policies used with network ports.