Service ingress QoS queues

About this task

To create service ingress queue parameters, perform the following.

Procedure

Define a new queue ID value.

The system does not dynamically assign a value.

Configure queue parameters. Rate, slope-policy, CBS, MBS, priority, and weight.

The following is a sample ingress queue configuration output.

Example

A:ALA-7>config>qos# info
echo "QoS Policy Configuration"
#--------------------------------------------------
        sap-ingress 1 create
            policy-name "default"
            description "Default SAP ingress QoS policy."
            no ip-mac-match
            scope template
            queue 1 create
              adaptation-rule cir closest pir closest
              rate cir 0 pir max
              slope-policy "default"
              mbs 60
              cbs 10
              priority 1
              weight 1
            exit
.........
#------------------------------------------
A:ALA-7>config>qos#