Configuring global MPLS parameters

Admin groups can signify link colors, such as red, yellow, or green. MPLS interfaces advertise the link colors it supports. CSPF uses the information when paths are computed for constrained-based LSPs. CSPF must be enabled in order for admin groups to be relevant.

Use the following syntax to configure MPLS admin-group parameters.

mpls
admin-group group-name group-value
frr-object
resignal-timer minutes

Example: Admin group configuration output

A:ALA-1>config>router>mpls# info
----------------------------------------------
            resignal-timer 500
            admin-group "green" 15
            admin-group "yellow" 20
            admin-group "red" 25
...
----------------------------------------------
A:ALA-1>config>router>mpls#