[no] shutdown
config>router>mpls
config>router>mpls>interface
config>router>mpls>lsp>primary
config>router>mpls>lsp>secondary
Supported on all 7210 SAS platforms as described in this document
This command administratively disables an entity. When disabled, an entity does not change, reset, or remove any configuration settings or statistics.
MPLS is not enabled by default and must be explicitly enabled (no shutdown).
The operational state of the entity is disabled as well as the operational state of any entities contained within. Many objects must be shut down before they may be deleted.
The no form of this command places the entity into an administratively enabled state.
no shutdown