peer ip-address
tools>dump>router>ldp
Supported on all 7210 SAS platforms as described in this document
This command dumps information for an LDP peer.
instance
tools>dump>router>ldp
Supported on all 7210 SAS platforms as described in this document
This command dumps information for the LDP instance.
interface ip-int-name
tools>dump>router>ldp
Supported on all 7210 SAS platforms as described in this document
This command dumps information for an LDP interface.
Specifies the name of an existing router.
memory-usage
tools>dump>router>ldp
Supported on all 7210 SAS platforms as described in this document
This command dumps memory usage information for LDP.
peer ip-address
tools>dump>router>ldp
Supported on all 7210 SAS platforms as described in this document
This command dumps information for an LDP peer.
session ip-addr[label-space] [connection | peer | adjacency]
tools>dump>router>ldp
Supported on all 7210 SAS platforms as described in this document
This command dumps information for an LDP session.
Dumps information for the specified IP address and label space identifier.
Filters output for connection information.
Filters output for peering information.
Filters output for adjacency information.
sockets
tools>dump>router>ldp
Supported on all 7210 SAS platforms as described in this document
This command dumps information for all LDP sockets.
timers [session ip-addr[label-space]]
tools>dump>router>ldp
Supported on all 7210 SAS platforms as described in this document
This command dumps information for LDP timers.
static-route ldp-sync-status
tools>dump>router
Supported on all 7210 SAS platforms as described in this document
This command dumps the sync status of LDP interfaces that static-route tracks.
Displays the sync status of LDP interfaces that static-route tracks.
ldp-sync-exit
tools>perform>router>isis
Supported on all 7210 SAS platforms as described in this document
This command terminates LDP synchronization and restores the actual cost of an IS-IS interface.
run-manual-spf
tools>perform>router>isis
Supported on all 7210 SAS platforms as described in this document
This command runs the Shortest Path First (SPF) algorithm.
ldp-sync-exit
tools>perform>router>ospf
Supported on all 7210 SAS platforms as described in this document
This command terminates LDP synchronization and restores the actual cost of an OSPF interface.
refresh-lsas [lsa-type] [area-id]
tools>perform>router>ospf
Supported on all 7210 SAS platforms as described in this document
This command refreshes LSAs for OSPF.
run-manual-spf [externals-only]
tools>perform>router>ospf
Supported on all 7210 SAS platforms as described in this document
This command runs the Shorted Path First (SPF) algorithm.
Runs external only SPF.